Hi,
Basic metric tools. Here is the procedure with some photo's.
Removing And Installing/Replacing Starter (M60, M62) Switch off ignition.
Follow instructions for disconnecting and connecting
battery.
Disconnect
battery negative lead from battery.
Unscrew and remove splash guard.
Images available only to Customers.
Cars without primary catalytic converters only (M60/M62): Unscrew screw.
Press cable guide to one side.
Images available only to Customers.
Unfasten screws.
Remove shield plate.
Images available only to Customers.
Cars with primary catalytic converters only (M62): Unclip
battery positive lead (1).
Unfasten screws (2).
Remove shield plate (3
Images available only to Customers.
Remove plug connection (1) of right oxygen sensor from retaining clip (2).
Remove retaining clip (2) from transmission.
Images available only to Customers.
All cars (M60/M62): Unfasten connections on starter motor.
Images available only to Customers.
Unfasten screws.
Images available only to Customers.
Remove starter motor from transmission mount.
Images available only to Customers.
Remove starter motor.
Installation: Check starter pinion for damage.
Check starter crown for damage.
-Russ(Doctor D) Please
Accept answer if this helps

Positive Feedback and/or Bonus's are appreciated!!

Thanks for asking your question at JA!